the big blue bus
I'm Awesome
when i price that out its moe than 60 just for the dom tube :/
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
full spool will snap axle shafts in the front end.
just the dom for the drag link and tie rod. the tube inserts jam nuts and tie rod ends and drank link ends. cant seem to come up with any cheaper way
That is my big concern with the spool. I just wonder how hard it will be on them? Given I have been able to keep the ifs together.full spool will snap axle shafts in the front end.
Care to explain why it pulls the front end down while turning? Not sure I understand what you mean.not just that it also will pull the front end down as it binds turning, i really hate that about mine but it sure bites hard in the mud
I've been MIA awhile, glad I saw this! Looking forward to progress of the build!
IF you are interested, I have a set of large bearing GM outers (big bearing 77+ dana 44 or 10-bolt) that have been drilled and 14MM studs installed to match the rear. I have no use for them since going 8-lug.