Have you ever seen a radio button spring? If you haven't, you are lucky. If you have seen one, you are an unfortunate soul who decided to take the radio tuner head apart for no real good reason and ended up with eleven tiny springs that help return the buttons to their positions after being pushed. The problem is, there are no holes, slots, connectors, or anything else to put the button in to to hold them in place while you reassemble the tuner head unit. There are eleven small springs for each of the "simple" buttons (1-6, RCL, Power, SET, AM/FM, AM ST) as opposed to the "rocker" buttons like Seek, Scan, Tune, Vol, Bal, and Fade. I also had three larger springs, one each on VOL, TUNE, and SEEK. Nothing on SCAN, BAL, or FADE.
How on earth do I put this back together? Try searching the Internet for radio button springs - zilch, nada, nothing. Any Delco manuals out there cover this?
Here's a video of the situation that also includes changing the lights and cleaning the buttons:
Here's a picture with the springs along with some blue scribbles approximately where each end of the springs rest after installation.
Here's what it looked like when I opened it up:
Any help on putting this back together again would be appreciated.
How on earth do I put this back together? Try searching the Internet for radio button springs - zilch, nada, nothing. Any Delco manuals out there cover this?
Here's a video of the situation that also includes changing the lights and cleaning the buttons:
xc_hide_links_from_guests_guests_error_hide_media
Here's a picture with the springs along with some blue scribbles approximately where each end of the springs rest after installation.
You must be registered for see images attach
Here's what it looked like when I opened it up:
You must be registered for see images attach
Any help on putting this back together again would be appreciated.