Hi, I don't no if any of you have trouble reaching the transfer Case lever in the earlier trucks but I always found it to far forward and low to reach when bouncing around on a rough stretch of track. Since I have built a full sized centre console I decided to make a remote that would position the lever higher and further back so it sits beside my B&M shifter. I cut the original lever off and fitted a connecting rod to the new lever. It had to drop down low near the floor to get the correct leverage to match the original travel and welded a long bolt with a thread to match the old knob to keep it looking original.
You must be registered for see images attach
You must be registered for see images attach