Bryan Fagan
Newbie
Thought I would post this in case there are any others that would like to add a lowering kit and put new wheels on. This may also go under the Lowered and Bagged Suspension thread. I found the wheel backspacing or offset very helpful but I was surprised to see not very many options for this type of build that didn't require some sort of fender adjustment, which mine did as well. Not unless you want to spend more on the wheels than what the truck cost you that is. You can always have Forgeline wheels make you up a set but one wheel will will cost more than all the wheels and tires combined did on this build. I hate to use the word budget build but that would closer describe what I did here. I have attached a couple of after and then the before picture of course.
Bell Tech Front 4"-5" front and "6 inch rear kit. Part number #696SP
Wheels: Ridler 8.5x20" front and 10x20" rear. Part number #650
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Bell Tech Front 4"-5" front and "6 inch rear kit. Part number #696SP
Wheels: Ridler 8.5x20" front and 10x20" rear. Part number #650