24 Karat Brown
Completely Broke
Ive finally managed to pull off the swap without any welding. It is as sturdy as factory and looks as if it was meant to be.
The bolt holes on the 14-18 bumper brackets line up to the holes cut in the frame. Youll need two long bolts and two spacers made from some strong tubing. The spacers are around 3" give or take. You will also need to cut a 1/4" thick (for strength) plate that will bolt into the hole in the frame and the nut welded onto the 14-18 brackets (That nut is used for a tow hitch on the 14-18 trucks)
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
The bolt holes on the 14-18 bumper brackets line up to the holes cut in the frame. Youll need two long bolts and two spacers made from some strong tubing. The spacers are around 3" give or take. You will also need to cut a 1/4" thick (for strength) plate that will bolt into the hole in the frame and the nut welded onto the 14-18 brackets (That nut is used for a tow hitch on the 14-18 trucks)
You must be registered for see images attach