bearing

  1. Bushoku

    1990 Single Cab K1500 - Upgrade to F44 (Heavy Duty) front end?

    I have a 1990 K1500 single cab without the F44 brake package. The RPO code for my brakes is JB3 (from looking online, this translates to "power brakes, front discs and rear drums, 4600 lbs."). I'd like to upgrade to the heavy duty chassis (stock ride height). I have been sitting on this Power...
  2. A

    Rear brake driver side drum doesn't sit flush

    I have a 95 Chevy k2500 14 bolt I replaced the shoes on both side the rear passenger side has no issues. I replaced the drum on my driver's side because the old drum is scored and thinner, I bought a new one and can't get the drum to seat fully on the top half even when spun the lower 2 lugs on...
  3. Arcee98

    2WD six lug wheel hubs for 4WD Suburban?

    I’ve got a 98 K1500 (4WD) Suburban I have converted to 2WD. I removed the front differential, driveshaft, and left the stub axles in the hub to prevent bearing failure. My question is where can I find or what GMT400 truck has 2WD wheel hub bearing assemblies that fit a six lug formerly 4WD...
  4. S

    Slightly lower oil pressure, worn bearings or kooky sensor? (After cam swap) C1500 5.7 1988

    Hi everyone I did a cam swap this spring, went from my stock cam to a comp CL122494. Just slightly larger then my stock cam. Everything has been behaving after driving about 1500 miles. I have noticed, and did notice a slight decrease in oil pressure many months ago and the “problem” still...
  5. offroadtahoe

    96+ GM109SS Lower Steering Column Bearing UPGRADE!

    https://www.wolffeng.com/store/p14/GM109SS_Lower_Steering_Column_Bearing.html just installed this kit and can confirm it fits our trucks perfectly,it leaves no play in the bearing,column housing,and shaft tip on install make sure to grease it up on the column housing,and the bearing housing...
Top