Search results

  1. gordinho80

    1995 K1500 - Replacing trans with 2003?

    Thanks for the reply... I called it and sold the truck as is... Now i'm looking for a 3500 Dually dump or 4x4
  2. gordinho80

    1995 K1500 - Replacing trans with 2003?

    Anybody?
  3. gordinho80

    1995 K1500 - Replacing trans with 2003?

    Reverse went on my 1995 K1500. I found a transmission in working condition off of a 2003. I know there are some issues with the 1995 tranmissions... but would the 2003 transmission work on my truck? I know you have to swap out a solenoid and a couple of other things for a 96 to 95 install...
  4. gordinho80

    A bunch of gmt 400 stuff! Help me clean out my garage!

    How much for homelink, shipped to NJ 08527?
  5. gordinho80

    Stammering when first running

    TBI motor. I replaced the CTS on the top of the engine. It still sputtered after I started it and drove. What really boggles me is that once the motor warms up a little, it runs smooth as silk.
  6. gordinho80

    Alternator issues

    Wanted to do the AD244, but I have a 1995 tbi
  7. gordinho80

    Alternator issues

    Threw in a rebuilt unit from advance auto this morning... It's survived the drive to work and back home. Will see how it holds up. I'll be dropping the HO one off at shop to have the fix it again.
  8. gordinho80

    Alternator issues

    Last month I brought my alternator in to have it rebuilt and have the amperage increased. Brought the alt home and threw it in the truck, drove for 3 weeks before it stopped charging. Brought it back to the shop who rebuilt it, was told it was the regulator. They fixed it on Monday, I put it...
  9. gordinho80

    Stammering when first running

    Anyone have any other insight into this?
  10. gordinho80

    Stammering when first running

    Well, I tried the filter first. Replaced that a couple of months ago, no luck, still stammers occasionally right after cold start. I just got around to replacing the fuel pump, as I figured that could be the culprit. No luck, still does the same thing. I'll fire up the truck, let it warm up for...
  11. gordinho80

    To replace torsion bars, or no?

    RPO codes from the donor truck are not possible. I have my RPO codes... FK2 & FK3 I believe are my RPOs for my torsion bars.
  12. gordinho80

    To replace torsion bars, or no?

    How does one find out which bars they are?
  13. gordinho80

    To replace torsion bars, or no?

    Shocks are on the list too. The yellow monroes on there now aren't the best... thats for sure.
  14. gordinho80

    To replace torsion bars, or no?

    The keys are not at full crank and the truck didn't drop much when I lifted the plow. I just want to stiffen the front a little more. I guess I need to get the PB blaster going and get the front end pulled into my garage to swap out the bars.
  15. gordinho80

    To replace torsion bars, or no?

    My 1995 1500 has just over 200k miles. It was stock height all its life until last year when I added blocks to rear and cranked the bars. Last year I was running 32" tires with the crank with a plow. No issues with that setup at all! I've since upgraded to 35" tires. I've been running these for...
  16. gordinho80

    Somone help me!!

    Hazard switch maybe?
  17. gordinho80

    Driver's seat Swap

    Entry lever on driver power seat does not slide the seat all the way forward like it does on the passenger side. I don't like it either, but I've gotten used to loading larger items from the pass side.
  18. gordinho80

    Fuel Filter line cutting?

    Has anyone ever had to cut out their fuel filter before the fittings? Fittings on my filter are pretty beat up and I don't see an easy way of getting the filter off. Even if I manage to get it off, I'm not confident in the condition of the fittings on the new filter. I've thought about...
  19. gordinho80

    Stammering when first running

    For past week or so, my truck has been stammering during initial run. I start the truck fine, let it run for a minute before pulling out of the driveway. When I pull out, for the first minute or so of driving, it stammers and sputters. I'm thinking the fuel pump is on its way out. After the...
  20. gordinho80

    4 Hi Headlight Mod

    I need to rip into my wiring. Something is funky with my headlights. I have the 4 HI mod done along with HIDs installed with a relay. My headlights come on by themselves. I've tried unplugging the headlight switch to see if that was causing any issues, nope. I have to pull the fuse on my HID...
  21. gordinho80

    Show me your Chevy with 33's on a crank and block.

    http://www.gmt400.com/forum/showthread.php?20913-Crank-and-block-on-33-s&highlight=crank http://www.gmt400.com/forum/showthread.php?22301-2-inch-blocks-with-a-crank-and-33s&highlight=crank
  22. gordinho80

    are there two coolant temp sensors on 98 vortec 5.7?

    WT3000 is the 2 prong sensor WT3025 is the 1 prong sensor that is right below the plugs on the driver side by the exhaust manifold. I broke mine while installing the headers and tried the WT3000 one first and saw that the plug was different.
  23. gordinho80

    Post pics of your truck with newer style factory oem wheels

  24. gordinho80

    Exploding headlight bulbs.

    You're not touching the bulbs with your bare fingers, are you?? Always use gloves when installing headlight bulbs. Any oil from your skin on a bulb like that will cook the glass of the bulb.
  25. gordinho80

    What do I do next?

    What are my tuning options for a 1995 OBD1?

Latest posts

Staff online

Members online

... and 15 more.
Total: 1,964 (members: 65, guests: 1,899)

Forum statistics

Threads
64,475
Messages
1,394,697
Members
51,752
Latest member
moverton05

Share this page

Top