Search results

  1. MallCrawler87

    Decided to build a sub box.

    Most people think the ground loop noise comes from the amp not being grounded to clean metal surface but I've come to learn it's really from the radio not having a good clean ground to bare metal...I NEVER use the ground from the factory harness...I always sand me down a nice clean spot...
  2. MallCrawler87

    Severe passenger side tire toe after replacing all front end components

    Yes steering was at correct point and at ride height...I ended up taking some off of each tie rod to give me some adjustment room and also replaced all control arm bushings and that corrected it as far as I can tell
  3. MallCrawler87

    Severe passenger side tire toe after replacing all front end components

    They were ordered online as a set..I ended up taking the passenger side tie rods and cutting them and it isn't near as bad now...plan on taking it to alignment shop and having them replace them if they say they can't align it
  4. MallCrawler87

    Severe passenger side tire toe after replacing all front end components

    Hey guys..I have a 94 gmc k1500 and just finished replacing tie rods,sway bar links,upper and lower ball joints,idler arm and bracket,pitman arm..I also installed 3" lift keys and flipped the upper ball joints to the underside of the control arm until I get new ones to accommodate the lift...now...
Top