Search results
-
Wiring diagram 94 silverado.
Thanks for the resource! It might help!- Barcdawg
- Post #3
- Forum: Audio + Electronics
-
Wiring diagram 94 silverado.
I've been slowly building my 90' and the harness I plan on using is out of a 94' I've already done a carburetor/hei/mechanical fuel pump swap. (currently have the truck running on a button a switch and 2 relays.) I'm trying to use the factory harness and thin out all the unnecessary wires. I've...- Barcdawg
- Thread
- Replies: 2
- Forum: Audio + Electronics
-
U joint part numbers.
looking to put new u joints in my rcsb heavy half 5 speed. preferably dana non greaseable joints. anyone familiar with the part numbers?- Barcdawg
- Thread
- Replies: 1
- Forum: Axles + Brakes
-
454 SS Steering box questions
From what I'm reading here a 3rd gen Camaro steering box will swap into a gmt400 truck? only 2wd or will 4x4 work too?- Barcdawg
- Post #8
- Forum: Stock Suspension + Bolt On Kits
-
Build log of a truck I'm going to refer to as the 90'
Been meaning to make another update but have been busy. I noticed there's a separate section for off road builds. Although the truck is 4x4 and will have mud tires. I'm not going to call it a offroad build because If I was designing a gmt400 for offroad. I wouldn't be using the half ton ifs and...- Barcdawg
- Post #10
- Forum: Street Build Threads
-
Build log of a truck I'm going to refer to as the 90'
I did test fit them right quick one day. And the bolt spacing to mount them and the rods that fit through the dust that connect to the piston fit fine. I think the only difference is the ID bore of the wheel cylinder.- Barcdawg
- Post #9
- Forum: Street Build Threads
-
Build log of a truck I'm going to refer to as the 90'
Next step was the box of the truck. I did the easy stuff first sanding and painting the bed floor underneath and above. mixed trimclad. (I believe you Americans call it rustoelum) and acrylic enamel hardner and brushed it on. The bed floor has a Duraliner in it and underneath will be undercoated...- Barcdawg
- Post #7
- Forum: Street Build Threads
-
Build log of a truck I'm going to refer to as the 90'
Next on my list was the wheels when they were on the trooper they were a light silver with blue around the outside. That's not going to work on a red interior truck. So I had them repainted a darker silver and red accents. I also finished painting the cross members that were off the truck and...- Barcdawg
- Post #6
- Forum: Street Build Threads
-
Build log of a truck I'm going to refer to as the 90'
Two of the biggest issues with the frame was all the rear crossmembers were out of the frame for like 10 years and If I remember right 2 of the cab mount/rad support mounts the hole was a larger od then spec. Due to rust. Now I don't know about you guys but I wasn't going to start cutting these...- Barcdawg
- Post #5
- Forum: Street Build Threads
-
Build log of a truck I'm going to refer to as the 90'
First thing first was to bring parts home brought the frame and mostly everything the cab orginal to that frame is still there. Anyway after bringing the frame home first thing to do was to start wire wheeling the frame down and applying DOM-16 its like a Canadian por15. One day while at work...- Barcdawg
- Post #4
- Forum: Street Build Threads
-
Build log of a truck I'm going to refer to as the 90'
He had suggested against the idea of finding a gmt400 as they were plauged with rust issues in nova scotia and finding a good one would be a challenge. One day he mentioned to me his sisters husband's son had one a RCSB 4x4 z71. There son had it built probably back in the early to mid 2000s and...- Barcdawg
- Post #2
- Forum: Street Build Threads
-
Build log of a truck I'm going to refer to as the 90'
Hey so I'm new here. I finally created account here but in all actuality I've been stalking the forums for the better part of a year and a half. I've got alot to cover to bring this thread up to April 3rd 2021. Before one journey begins a previous journey must end. For me this was a 2000 isuzu...- Barcdawg
- Thread
- Replies: 10
- Forum: Street Build Threads
