Search results

  1. Alexisobs95

    Pushrod problem

    Oh thanks for being honest but like I said I been checking everything did compression test checked if pistons hits with valve removed everything again but ima change the springs and some other parts hopefully this fixes the problem
  2. Alexisobs95

    Pushrod problem

    Oh lol yeah it started fine no problem didn’t hesitate to start still cannot decide what to do though get beehive springs with retainers would be my best option I would think
  3. Alexisobs95

    Pushrod problem

    Wouldn’t it not start if marks were not ligned up correctly?
  4. Alexisobs95

    Pushrod problem

    So what would I need ?
  5. Alexisobs95

    Pushrod problem

    I didn’t purchase new pushrods I used the original ones I checked everything nothing was bent he’s gonna sell me hardened pushrods and he said that will fix the problem
  6. Alexisobs95

    Pushrod problem

    Well when I contacted them about what cam would be best for this he only told me spring were gonna be changed then I told him about this problem and he said yeah sorry o forgot to sell you hardened pushrods
  7. Alexisobs95

    Pushrod problem

    Thanks also I called the shop that sold me the cam and they told me they forgot to sell me the right pushrods that they were gonna call tomorrow to sell me the right ones would that be the issue ?
  8. Alexisobs95

    Pushrod problem

    Yeah I intalled correctly dot to dot in timing truck started right up with no problem and like I said no valves were bend already did a compression test
  9. Alexisobs95

    Pushrod problem

    My trans is auto and it’s was my first time cranking it when that happened what would recommend me to do get another set of pushrods?
  10. Alexisobs95

    Pushrod problem

    What do you mean by money shift also ?
  11. Alexisobs95

    Pushrod problem

    And the pushrod came out bended so where the other one too but only like 4 we’re not
  12. Alexisobs95

    Pushrod problem

    My dad was adjusting the rocker when he felt it really loose and told me to turn the truck off
  13. Alexisobs95

    Pushrod problem

    Out of 16 like 12 I believe truck didn’t last long running quickly was shut off
  14. Alexisobs95

    Pushrod problem

    Yeah tha t what I did I have the tools to check compression on each valve and no valve leak that why I’m curious of how it bended the pushrods
  15. Alexisobs95

    Pushrod problem

    Valves weren’t bended neither were the valve seals do I need hardened pushrod or will they bend too?
  16. Alexisobs95

    Pushrod problem

    Not sure mine is a 5.7 vortec but More then likely yeah it does apply too
  17. Alexisobs95

    Pushrod problem

    Also checked if the valve seals messed up they seem to be good and no valves where bended neither
  18. Alexisobs95

    Pushrod problem

    Yeah that’s what I want to know why they bended probably bad adjustment don’t really thinks so I went today to the shop that sold me the cam but the guy wasn’t there ima go tomorrow again to see what I can do because I don’t think I can return the springs it has and get the beehive ones
  19. Alexisobs95

    Pushrod problem

    So I can just buy the stock push rod and rea adjust the rockers again ?
  20. Alexisobs95

    Pushrod problem

    original rockers only changed my springs and replaced the valve seals but don’t know why my pushrods bended
  21. Alexisobs95

    Pushrod problem

    I have just about 480 lift
  22. Alexisobs95

    Pushrod problem

    So ima have to buy the springs again and retainers and that will fix why my pushrods bended ? Hopefully no valves were damaged
  23. Alexisobs95

    Pushrod problem

    What do you mean by intalled correctly? I removed everything that was supposed to be taken out and also went ahead and replace the valve seals
  24. Alexisobs95

    Pushrod problem

    This are the specs on the springs I was given do those retainers fit my springs or Wich do you recommend to install on my springs ? SPECS : Free Length : 2.404" Outside Diameter : 1.260" Inside Diameter : .876" Wire Size : .192" Closed Pressure : 110# @ 1.700" Open Pressure : 285# @ 1.210" Coils...
  25. Alexisobs95

    Pushrod problem

    Well I upgraded springs and changed the cam like I was told to never new I needed the retainers for clearance so your saying if I change the retainers I’m not having no more bended pushrods ?

Latest posts

Members online

Total: 1,313 (members: 28, guests: 1,285)

Forum statistics

Threads
64,351
Messages
1,391,915
Members
51,471
Latest member
Jake rogers

Share this page

Top