The difference between the DIC without mode and the one with is a matter of more than one wire difference. I believe I ran 7 wires to mine. It's most likely reading nothing because it doesn't sense that the truck is running.
Hi all, I've installed a few DEI remote start/security systems in the past for friends and family. All of which are still working great, now it's time to install one in my own vehicle. Any input on Viper vs Compustar for a diy? I like DEI because I can change settings with or without the...
The shim would make the relief valve open sooner and give you less pressure. Looking at the piston on the left with the blue spring, that's not a gm spring and is why the nut is bottomed out. Gm used shims or no shims depending on if you ordered a Yukon vs a 1 ton truck with a plow package, the...
Anyone reading this now, the relief valve shown in the pictures does not dictate how the steering will feel, it is a relief valve. If you hold your steering wheel at full lock, this is the valve that prevents you from going beyond that point because it will relieve pressure. A lot of people end...
Hi all, been trying to chase down a driveline vibration for the past couple of years now. 98 GMC 4x4 1/2 ton with a rcx 6" lift.
I get a vibration that starts at 70 mph and doesn't go away even if I go faster, I also get a vibration for 1-2 seconds when I let off the gas going 50mph and over...
Have had the 6" RCX lift for 3 years now and I've been chasing this Vibration on decel at 65+. Any body else have similar issues after installing this lift? Im Guessing maybe a bad pinion angle but the blocks were tapered.
From what Ive read, 88-98 steering gear boxes are interchangeble but there is 3 different models used at least throughout the years. I need to know the internal differences between them like ratios and whatnot.