Recent content by matad311

  1. matad311

    Aftermarket remote Start Wiring for Door Locks with AU3 code with no AU0 Code

    Perfect just what I needed to hear, thanks for the help! Ill be tackling this in the next week or two. So I could be chiming back in for some more info if I run into a snag.
  2. matad311

    Aftermarket remote Start Wiring for Door Locks with AU3 code with no AU0 Code

    I just came across your photo. So this is the standard 5 pin relay system I keep seeing then and what I would need to wire up? So my Green and Blue Wire from the remote start module would go to the 85 pins. Now would my interior door lock and unlock buttons still work with this?
  3. matad311

    Aftermarket remote Start Wiring for Door Locks with AU3 code with no AU0 Code

    Hi I need some help setting up the keyless door locks on my 98 C1500. I have the CODE AU3 but not AU0, meaning I have power door locks but not factory keyless. I am really struggling trying to figure out how to hook up the door locks to my aftermarket remote start. I don't know if I need to wire...
  4. matad311

    Under Seat Storage Box Ideas? Extended Cab Jack Box Removed

    I actually didn't come up with anything unfortunately. Still looking for ideas, but I am probably end up doing a small sub under the rear seat drivers side. I know I said I wasn't going for a sub, but now that all my speakers are replaced I might as well add some power to the system. For the...
  5. matad311

    Rear disc brake conversion keeping 15” wheels

    Unfortunately I have not got around to it. But i will make some brackets eventually to do this. Kinda in a position where I want to upgrade to a 14 bolt rear end before I put more money at this 10 bolt, but also realizing I need the parking brake for launch my boat. But I do of a guy from a...
  6. matad311

    GMT400 2WD Lift Guide.

    Do the 6 lug rotors go right onto the 1500 spindles? Or do I need 2500 lift spindles and do ball joint conversion? Just curious for when i possibly want to buy new wheels. Sent from my iPhone using Tapatalk
  7. matad311

    GMT400 2WD Lift Guide.

    You can get the tubular uppers from Chassis Tech or known as Airbagit. I called and ordered mine. I have a screen shot posted earlier with a part number I believe to the ones I have that are not adjustable. Also posted a screenshot of the adjustable ones to with the part number. Sent from my...
  8. matad311

    Leaking 3rd Brake Light/Cargo Light 1995 K1500

    I figured if I was doing this I said "dammit I am gonna make sure this cargo light works!" I have never used the gem cargo lights because the lens was so yellowed it never put out enough light haha. I also ground the cargo light circuit that way I can flip the cargo lights on at any given time!
  9. matad311

    Leaking 3rd Brake Light/Cargo Light 1995 K1500

    Heres at night photos...
  10. matad311

    Leaking 3rd Brake Light/Cargo Light 1995 K1500

    The brake light is such a big problem and have been working on it myself still! But I had to take the problem into my own hands and I think I have finally found a solution. I have been testing it for about 7 months now and its still holding up great. I designed and developed my own third brake...
  11. matad311

    Inner fender splashguards

    Looks good! I really need to order some for my 2wd. I wonder if I could get them in cut since I have tubulars Sent from my iPhone using Tapatalk
  12. matad311

    GMT400 2WD Lift Guide.

    Not fair! Haha you must have got someone in a better mood that day Sent from my iPhone using Tapatalk
  13. matad311

    GMT400 2WD Lift Guide.

    Mine were $554.68. Then count the additional custom color powder coating was $60 from someone else. Sent from my iPhone using Tapatalk
  14. matad311

    GMT400 2WD Lift Guide.

    And you may not find off the self. I would call chassis tech and see if they have ones or if they can make them. Very helpful guys on the phone. I mean I was able to order my arms without powder coat and should have told them to not include hardware or ball joints. to save some more money but oh...
  15. matad311

    GMT400 2WD Lift Guide.

    They were hard to compare but if they are longer its not by much, im talking like 1/4-1/2" longer. But the big difference is the ball joint pocket is lowered significantly by like 2-3" lower that the mounting plane of OEM arms.
See more

Latest posts

Members online

... and 1 more.
Total: 1,374 (members: 51, guests: 1,323)

Forum statistics

Threads
64,352
Messages
1,391,953
Members
51,472
Latest member
Jake rogers

Share this page

Top