Members

JCribb

Old Army truck mechanic 43 From Naylor, MO

Joined: Jul 19, 2016

Last seen: Sunday at 8:50 PM

Latest activity Postings About

- JCribb replied to the thread Addiction is bad, or is it?.
  
  Still working on wiring fiascos. I went to another salvage yard and grabbed a brake light/ fuel pump harness that goes along the frame...
  
  Sunday at 10:11 AM
- JCribb replied to the thread Addiction is bad, or is it?.
  
  Still slowly working on this rig, mostly paint at this point. Went to pick n pull and got myself a bumper w/o the ugly trim, it’s now...
  
  Sunday at 10:04 AM
- JCribb reacted to Schurkey's post in the thread 1 wire to 3 wire O2 Sensor with Like.
  
  I'm sure that's true with 3-wire heated O2 sensors. I'm not sure that's true with 4-wire sensors. And I happened to have a spare...
  
  Sunday at 9:53 AM
- JCribb reacted to tayto's post in the thread 1 wire to 3 wire O2 Sensor with Like.
  
  did you check to see if the fuse is hot even with key off? i have seen the fuel pump fuse on battery voltages. I splice into the NC side...
  
  Sunday at 9:52 AM
- JCribb replied to the thread 1 wire to 3 wire O2 Sensor.
  
  If I had a cat to cook, I’d understand, but it magically disappeared like my ex wife’s faithfulness. It’s the tbi rich smell I’ve...
  
  Mar 22, 2023
- JCribb reacted to Schurkey's post in the thread 1 wire to 3 wire O2 Sensor with Like.
  
  That's probably telling you that the catalyst has failed. A new O2 sensor is a good idea, but also be looking for misfire. 'Course, at...
  
  Mar 12, 2023
- JCribb replied to the thread 1 wire to 3 wire O2 Sensor.
  
  I replaced the whole exhaust because it did. New y pipe and all. Put the old sensor in, I’m thinking it’s been long gone for quite some...
  
  Mar 12, 2023
- JCribb replied to the thread 1 wire to 3 wire O2 Sensor.
  
  I’m going to do this conversion on my 89 4.3 c1500. The rich smell is excruciating, and it doesn’t do as well as I thought it would mpg...
  
  Mar 11, 2023
- JCribb reacted to rockymtnlover's post in the thread 1 wire to 3 wire O2 Sensor with Like.
  
  After a few tanks through it I'm confident in saying that I've got about a 2 avg mpg increase from 12 to 14... a lot of my driving is...
  
  Mar 11, 2023
- JCribb reacted to 351FUN's post in the thread 1 wire to 3 wire O2 Sensor with Haha.
  
  Well it's GM, so the magic 8 ball must have finally come up yes :p
  
  Mar 11, 2023
- JCribb reacted to PlayingWithTBI's post in the thread 1 wire to 3 wire O2 Sensor with Like.
  
  IMO it is worthwhile. Why do you think GM went to HO2 sensors later? :33:
  
  Mar 11, 2023
- JCribb reacted to Pinger's post in the thread 1 wire to 3 wire O2 Sensor with Like.
  
  I have an AFR gauge on the dash and with the heaters connected I can see the mixture cycling. The cycling starts sooner from cold and...
  
  Mar 11, 2023
- JCribb reacted to Schurkey's post in the thread 1 wire to 3 wire O2 Sensor with Like.
  
  I've got less than 20 miles on the fully-wired O2 sensor. The 5-amp fuse is still good. (So far, anyway.)
  
  Mar 11, 2023
- JCribb reacted to PlayingWithTBI's post in the thread 1 wire to 3 wire O2 Sensor with Like.
  
  Just to clarify, the early ECMs didn't control the heated O2 - there weren't any, originally just a 1 wire O2. I'm running mine off the...
  
  Mar 11, 2023
- JCribb reacted to sewlow's post in the thread suburban rear swaybar on obs ?? with Like.
  
  Did that exact project on my '97. You'll need (2X) 3" heavy duty exhaust clamps. Mount 'em between the shock brackets, so that they are...
  
  Mar 3, 2023
Show older items
Loading…
Loading…