P
Pbeanbag
Latest activity Postings About
-
-
PPbeanbag replied to the thread another ECM issue.So after removing the Xtra wires it decluttered most of the mess. The one wire that I repaired from the tranny harness seems to have...
-
PPbeanbag replied to the thread another ECM issue.here is another pic of Chef Boy-R-Dee's dinner special. also my rich mixture code went away but it seems like the timing is messing...
-
-
PPbeanbag replied to the thread another ECM issue.
-
PPbeanbag replied to the thread another ECM issue.that's only what you see . behind the center vent was (is) a cluster of wires that went to the plow which you can see where i cut that...
-
PPbeanbag replied to the thread another ECM issue.that's only what you see . behind the center vent was (is) a cluster of wires that went to the plow which you can see where i cut that...
-
PPbeanbag replied to the thread another ECM issue.hi guys, yes i pulled the wrong fuse. i got confused on the diagram you sent me. So...today i removed the gauges fuse and the hum was...
-
-
PPbeanbag replied to the thread another ECM issue.yes Chef Boy-R-Dee lives there. and when the truck was first running i was going 15 mile runs and never aproblem (even with the humming...
-
PPbeanbag replied to the thread another ECM issue.she's an '88 k3500 with 5.7 Liter but the block is gen 1 with tbi that bolts like a 78 and the head lights say its an 89? finding parts...
-
PGreetings Pbeanbag, Welcome to the GMT400 forum. Listen, the electrical systems were changed over the years. Help us help you by...
-
-
Loading…
-
Loading…
