Will these axles fit?

[TruckinAin4Sissies]

Will these axles fit under my truck?
Let me rephrase: Will these fit easily? Or is there a more desirable setup?

You must be registered for see images attach

10 bolt front
12 bolt rear
Blazer 1/2 Ton

 

[TruckinAin4Sissies]

To those of you that aren't familiar with my truck, here it is:

You must be registered for see images attach

 

[canuckz71]

If your going to swap axles get a 14 bolt rear axle much stonger then the 10 bolt that I assume you have. Not sure if those axles would fit or not though.

 

[86454k30]

The rear axle will bolt in with a spring pad width change but, you wouldn't be gaining much...if anything. The front will only fit if you change transfercases because the 88-98 are driver side drop like fords, the 73-87 are passenger side. In addition by using a 10 bolt or dana 44 front you MUST have a "flattop" knuckle on the passenger side so that it can be machined and tapped for a steering arm. So long story short NO not a direct bolt in or a simple one for that matter.

 

[TruckinAin4Sissies]

Roger that.
My buddy's parting that ugly truck & figured I'd grab those axles up

 

[Vigh_J]

Swap bodies lol