youngblood78
Newbie
Hey guys first off im new to this forum but not to my trucks. I have a question that maybe can be answerd here at a gmt400 specific site.
Im planing to SAS my 94 1500 and ive got a 10 bolt front to do it with. My truck has the nv4500 with external slave cylinder.
Ive found a np241 passenger side drop with electric speedo.
Now to the question do any of you see me running into my drive shaft hitting the bell housing when the front compresses.?
ORD brackets=3" lift and 2"lift spring so 5" total lift
I know on square bodys you need a lift for it to clear
Im planing to SAS my 94 1500 and ive got a 10 bolt front to do it with. My truck has the nv4500 with external slave cylinder.
Ive found a np241 passenger side drop with electric speedo.
Now to the question do any of you see me running into my drive shaft hitting the bell housing when the front compresses.?
ORD brackets=3" lift and 2"lift spring so 5" total lift
I know on square bodys you need a lift for it to clear