So after reading the thread I have two quick questions. On my 97 extended cab will all the brackets that hold the console up be underneath the headliner?
Also I know on other vehicles I have had that they are prewired for other options etc. Are these trucks possibly prewired for the additional map lights that are in the console?
Thanks
I had my headliner out for recovering and measured and cut for the mounting holes while it was out. It's very easy that way. As was posted above, the slots and mounting hole are already there.
As for wiring, on my 97, I had to tap into something for power. Nothing was pre wired. Since my headliner and A-pillar trim were already out, I ran wires down the driver's side A-pillar and hooked into a power wire there (old hookup to now gone alarm). I also ran another pair of wires through there that aren't used for anything in case I want to add a switch or accessory of some kind that needs power. You can tap into the power at the dome light. I tapped into an ignition powered wire so I won't accidently leave a map light on.