Welp, finally found some 15” square body wheels, apparently they are the 4 slot base model wheels, not the rallys, something I didn’t know about. Mounted them up this morning and they scraped some of the outside edge of the caliper. All I used is a file and was able scratch off some of the caliper. WAY easier than what some people made it sound like on other forums.
So, now we have a solid answer to this age old question:
you WILL have to shave some of the caliper, which is easily done with a file.
All I have to do is get some trim rings and 2 more rear center caps since these trucks don’t have the lock-outs. All-in-all, these wheels should look pretty good when I paint them tan to match my lower two-tone, of course next year since it's getting too cold for painting.
Here's where I had to file off some of the caliper on the top:
You must be registered for see images attach
This is how it looks on the bottom part of the caliper:
You must be registered for see images attach
These are the said 4 slot wheels that I picked up for $250 with 2 brand new BFG KO2 31x10.5s on them, should be able to sell the tires for $250 and easily get my money back.
You must be registered for see images attach
Might be hard to tell, but here's where these wheels rubbed:
You must be registered for see images attach
Question: can I use these lug nuts for them? They are just the standard M14x1.5 acorn lug nuts that I use on my current aluminum wheels:
You must be registered for see images attach