Question about Installing a Power Window Roll-up Module w/ My Alram

[M1LILMIKEG2XX3]

Ok now for the window roll-up module. I got this when I purchased my alarm
but it doesn't have installation instructions but has a diagram which I don't understand. Anyone understand it, or know what to do.

Wiring diagram found here...
[URL="http://cgi.ebay.com/POWER-WINDOW-ROLLUP-MODULE-CAR-ALARM-ROLL-UP-ALARMS-/390269144064?pt=LH_DefaultDomain_0&hash=item5addda8c00[/URL]


OK NOW TRY GOOD FOR 11 DAYS

 

[badazzbulldog]

that link is no good posting on ebay was removed,cant get to wire diagram

 

[M1LILMIKEG2XX3]

OK NOW TRY GOOD FOR 11 DAYS

 

[truckintim05]

Hmm...off brands. Wiring looks a little funky to me, and it also looks like you can only go one direction with the windows. It uses a negative trigger, so make sure to to test the polarity of the switch to motor wire when rolling the windows up. It needs to be (-). Fairly straight forward. The small harness goes to the auxiliary output of the alarm, and to + switched ACC.