Project Fast Fwd

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

thz71

Stock SUCKS!
Joined
Sep 5, 2012
Messages
18,183
Reaction score
1,210
Location
Iowa
I work with what j got it'll get fixed right when I get time lol
 

thz71

Stock SUCKS!
Joined
Sep 5, 2012
Messages
18,183
Reaction score
1,210
Location
Iowa
Crashed the Damn thing and crushed the control arm then drove it 70 miles on slippery roads ruined a tire and almost died lol
You must be registered for see images
 

thz71

Stock SUCKS!
Joined
Sep 5, 2012
Messages
18,183
Reaction score
1,210
Location
Iowa
Yeah I'd say that's bent
You must be registered for see images

That's not supposed to rub
You must be registered for see images
no problem.ill just cut that off
You must be registered for see images

Looks like PO did the same thing
You must be registered for see images

Fixed
You must be registered for see images
 

twomanymontes

car show addict
Joined
Jan 26, 2013
Messages
4,666
Reaction score
327
Location
Buffalo NY
Was that the correct lower control arm? That's a pre 04control arm. That flange is for the sway bar links on the early models. Looks like it fits fine, just curious as to why they sold you a different control arm. Is the rim OK? Hard to tell if that was damage at the bottom or just snow and salt.
 

thz71

Stock SUCKS!
Joined
Sep 5, 2012
Messages
18,183
Reaction score
1,210
Location
Iowa
Was that the correct lower control arm? That's a pre 04control arm. That flange is for the sway bar links on the early models. Looks like it fits fine, just curious as to why they sold you a different control arm. Is the rim OK? Hard to tell if that was damage at the bottom or just snow and salt.
Idk what happened there that's the right control arm according to rock auto. It works that's all that matters lol the rim is on but I'm getting g new rims soon because I scored a set of 18 inch tires for free so I'm going to buy rims
 

twomanymontes

car show addict
Joined
Jan 26, 2013
Messages
4,666
Reaction score
327
Location
Buffalo NY
As long as it works. That's what matters. 18" rims and tires will fill that wheel well nicely. Then you need to lower it!
 
Top