Ruger_556
I'm Awesome
- Joined
- Jul 22, 2013
- Messages
- 4,741
- Reaction score
- 179
I drilled a hole in the passenger side kind of down and to the left of the heater core
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
If your truck is an automatic, there is a knock-out on the firewall that would be for the slave cylinder/clutch rod that can be used, with a grommet of course.
That's what i did for the 4 gauge feed wire...
Check under the heater core hoses on the passenger side of the fire wall. I have a yellow plug there visible if i pull back my rubber flooring.