Sean Sills
I'm Awesome
How thick is the firewall? I'm looking at drilling through the passenger side to run a wire through. Can someone show me on a picture the easiest place to drill and come out inside the cab.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Passenger sideI'm guessing about .030-.040" Where are you hooking up inside the cab? Left side or right?
Where do I find the entry point in the driver's side?Not nearly enough information provided to give an accurate answer, so my advice is no holes and slip it through the driver's side.
did you get the signal from an alternator or..When I installed my remote entry/start in my truck I had to run a wire through to get a tach wire, really no need to drill a hole.
No, I tapped into the white tach wire off of the coil.did you get the signal from an alternator or..
I’ll try and get a picture. It was all the way to left on driver’s side, there’s a factory penetration. Kinda, up behind Parking Brake.Where do I find the entry point in the driver's side?
Oh nice i didnt knnow the coil on these had a tach output coolNo, I tapped into the white tach wire off of the coil.
I’ll try and get a picture. It was all the way to left on driver’s side, there’s a factory penetration. Kinda, up behind Parking Brake.
Not sure what truck you have but on my 91 there is a white wire with a connector coming off the coil that you can plug into for a tach drive. I'm guessing it's for diagnostics.Oh nice i didnt knnow the coil on these had a tach output cool