Pic Request - 4" lift on 33s

[BIGWILLZ71]

Just would like to see a pic of a 4" SUSPENSION lift and 33s. I've decided I don't wanna body lift another Z71, and I only wanna run 33s so I wanna do a 4" suspension w/ 15x12s and 33x14.00/14.50s. Preferably Reg. Cab, but anything just 4" and 33s Thanks...

 

[Mike]

Check out my photo album http://www.gmt400.com/forum/album.php?albumid=18 there's probably a few of what you're looking for but a 4 and 6" kit is basically the same and by that point 35s look much more proportional.

 

[98chev]

heres my 3 inch body lift with 33s. pretty proportional i think

 

[1ugly88]

no lift cranked on 33's.......

You must be registered for see images attach

You must be registered for see images attach

 

[Butch]

I'll *****... '91/3"BL/Bald 33s

You must be registered for see images attach

 

[dirtridinz71]

Here is a picture of my truck with a 6" superlift (5.5" Block in rear), cranked to level, on 33's.

You must be registered for see images attach

 

[Clutch1819]

heres mine. 33's with a 4 inch rough country lift.

You must be registered for see images attach

 

[jcro61]

no lift cranked on 33's.......

You must be registered for see images attach

You must be registered for see images attach

what size block in the back if any and how high is that cranked. i like how it looks

 

[1ugly88]

what size block in the back if any and how high is that cranked. i like how it looks

no blocks in the back. swapped out my old sagging 3 leaf springs for a 5 leaf setup. i think they are for a light duty 2500. as for the front it's just cranked level. i wouldn't really recommend cranking that high as it rides like **** and eats upper ball joints. been thinking about that rough country 3" lift to help out my angles. also hoping i won't have to crank as tight to get it this high too.

 

[jcro61]

I see the 2500 all the time level out. i never see them with a rake. do they have diff parts up from than the 1500?