Ok guys, we need your help.

[kennythewelder]

Ok everyone with a 1994 truck, listen up. I need pics of your wiring. This member NEEDS your help. She can not read a schematic, so she needs pics. Here is what she needs.
I need pics of the wiper connectors the cruise on the back firewall, the brake switch at the pedal, and some of the the beginning wires at the fuse box and a few at the ends, along with the connector at your left foot , at the convenience center.

 

[kennythewelder]

@KeKe2369 truck is a 4x4 by the way. Any help is appreciated.

 

[SUBURBAN5]

Wish I could help... mine a 98 and 2wd

 

[kennythewelder]

Wish I could help... mine a 98 and 2wd

Yes, same here, mine is a 97.

 

[reservoir dog]

I'm assuming my 94 blazer 4x4 should be the same , after work I will try and get some pics , may be tomorrow before I get them posted .

 

[kennythewelder]

I'm assuming my 94 blazer 4x4 should be the same , after work I will try and get some pics , may be tomorrow before I get them posted .

Yes, your blazer should be the same, I think. Thanks.

 

[reservoir dog]

Got these , I'll get more later, about to storm here

 

[reservoir dog]

The 4 wire connector is the wiper motor, the other is cruise

 

[KeKe2369]

I'm assuming my 94 blazer 4x4 should be the same , after work I will try and get some pics , may be tomorrow before I get them posted .

Omg, I would be forever grateful…

 

[reservoir dog]

The pics under the dash are gonna be tough, I'll do my best