mjleg
Ya...I Like Trucks
- Joined
- Apr 18, 2010
- Messages
- 188
- Reaction score
- 15
How hard is it to change out? Can I do it by just jacking it up and going under? It seems to be leaking near the back of it...Is this common?
Matt
Matt
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I can pull my whole oil pan all the way out on my 96 c1500 with a 350 without removing much. IIRC I only need to remove the oil filter, and flywheel cover. but my setup is unique, so you may be a little different, but its not nearly as bad as a 4wd truck.
thnings that may be in your way on a 2wd 305 is: oil filter/filter adapter/cooler lines, trans cooler lines, starter, convert cover?
I don't have a trans or oil cooler anymore, I use a different starter than most, and I've got a manual trans so most of all this isnt in my way anymore.