Vodka0tter
I'm Awesome
I did a trans swap from auto to manual in my '97 RCSB. Started this almost 2 yrs ago, things got in the way but wrapping it up now. When I removed the auto, I chased all the wires back to the PCM and unpinned them. So I know I have a NSS problem because I removed the wiring. I'll tie this into the clutch pedal but for today, I just want to fire it up for some initial testing. Obviously I get no power to the starter. All other power acessory, lights etc.. functions as they should.
Is this as easy as pulling the (Yellow) wire from ignition (column) NSS circuit and tie it into the purple starter solenoid wire?
Is this as easy as pulling the (Yellow) wire from ignition (column) NSS circuit and tie it into the purple starter solenoid wire?