needing help with rear blocks and AAL

[firefighter_2319]

i put my 6 in suspension on my 97. i added the AAL and the 3in blocks. after all done there is a 1-1/2 difference in the rear and the front. can i get different blocks to make it level without messing with the torsion bars since its already been to the alignment shop. if so what size blocks do i need to get? thanks in advance

 

[96k1500]

You can get 4" blocks or 5" most lifts will sit with the back a little lower

 

[firefighter_2319]

sorry was meaning a 1in to a 1 1/2 difference

 

[firefighter_2319]

im wanting the rear to sit lower a bit cuz its alot higher than the front

 

[96k1500]

The rear is actually higher? Just pull the block or aal out and itll sit a little lower

 

[firefighter_2319]

The rear is actually higher? Just pull the block or aal out and itll sit a little lower

yeah it sits higher. if i would have know that i wouldnt have added the AAL, too much of a pita to put in. but will the AAL make up some of the blocks if i take the blocks out?

 

[96k1500]

If you pull the block the aal will still add the 2" or so of lift itll just drop the back down the 3" the block lifts it