MSCustoms
Its not just a Truck
- Joined
- Jan 14, 2013
- Messages
- 3,353
- Reaction score
- 195
Sounds like you are going a similar route. I used 2x2 and 2x3 in some places and uses 14 gage tubing with grade 8 hardware. I made the brackets complicated to the point where if any welds failed, then the way it is bolted together will keep it from coming apart. I could not use the center fold down seat as is and had to narrow it by 2 or 3 inches. I made it out of 2 center seats