my 88 RCSB build thread

[LoudnLifted88]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[LoudnLifted88]

I used a 78 ford high pinion Dana 44. I put a Detroit true track in it with 4.10 gears used off road design leaf spring hangers with 73-87 52” rear springs that gave me about 8” of lift, off road design cross over steering with a Reid racing knuckle on the passenger side to accept the high steer arm in the rear I did off road design shackle flip with a add a leaf and 1” block and sitting on 37s. The motor is a goodwrench 350 mild cam edelbrock intake and carb backed by a nv4500 and factory transfer case. Stock rear driveshaft and a k-5 front driveshaft with the cvv joint ground down for clearance with a conversion u-joint going to the front axle. The front bumper was home made out of 3/16 and 1/4” steel and has a 12k pound rough country winch mounted in it

You must be registered for see images attach

You must be registered for see images attach