Lifting a 6.5TD 3500

[Big D]

Contact https://treklinemotorsports.com or this link https://www.ebay.com/itm/1988-2000-...ash=item43f7b841ae:g:AugAAOSwcLxYCsKI&vxp=mtr

or @Sbrant on here (although it says he hasnt been on since Jan) I put one of there prototype "4.5 spindle lift on my truck about a year ago without issues. they were suppose to go into production soon after, but I dont see them on there page. but im pretty sure the ebay link is there spindle, Its a complete fabtech copy.

 

[Chewy1576]

My K3500 has a 6" Procomp lift. I know you are running a 2WD, but there must be something out there for your application tool

 

[Jondaytona]

I recently ended up with my 96 C2500 burb with the 6.5TD. Couldn't find much for lifting it especially because it's the diesel (for whatever reason). From what I've read up on, there's a slight clearance issue between the engine and body. I have had my truck on the hoist staring up at the motor and body not finding anything that would create an issue. Others have said they've done it no problem with a 3 inch body lift kit specified for the gasser. I've also found cheap kits on eBay with leaf spacers in the rear and coil spacers in the front for a couple hundred bucks. So a couple hundred for a 3 inch body lift that has no effect on towing, then an additional 2 inches for another couple hundred bucks if you really wanted to. That's the route I was heading toward before I ran out of money.

You must be registered for see images attach

 

[Sparkysikes]

Always loved lifted burbs. Get er done and show photos