L31MaxExpress
I'm Awesome
I now have the vans interior harness powred through the pins on the C100 plug leading to the fuse box. When I do this I power it through a fuse link that I purposely prepare 1/2" longer than normal and crimp a spade on to it. Later, I simply cut the spade off, the fuse link is reduced to the correct length, then I connect it to the 10awg wires that crimp into the Packard 59 pins.
Testing the exterior lighting at the moment, good thing I have ever bulb on the way as a LED replacement. Numerous failed bulbs and the side markers, turn signals, and tailights are all extremely dim from being ancient incadescents. the DOT approved LED replacements for the OE sealed beams seem awesome, loads of light to see deer and other animals on those dark country roads.
Testing the exterior lighting at the moment, good thing I have ever bulb on the way as a LED replacement. Numerous failed bulbs and the side markers, turn signals, and tailights are all extremely dim from being ancient incadescents. the DOT approved LED replacements for the OE sealed beams seem awesome, loads of light to see deer and other animals on those dark country roads.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach