Chummins24v
Newbie
Hey y'all I bought a lower control arm from a wreckers for my 94 k2500 8lug, but the distance between both bushings is just under an inch wider than the old one, could this one have come out of a 3500?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It says my file size on the photo is too large, but the arms both look exactly the same except for the one being a little narrower
CorrectMy understanding is that even a 1/2t will fit, meaning they are the same size. Its the uppers that are different. Hopefully someone else will chime in...
Far as I know, there's three styles of lower control arms for 4WD GMT400 vehicles:8 lug lower A-arms are 8 lug lower A-arms. SRW and DRW.
6 lug lower A-arms are 6 lug lower A-arms. 1500 or 2500 LD.
Unless its visibly bent or the bushings aren't installed properly, they're the same size