Well I got one of my accuair 5 gallon tank, pump,4 valve set up. I definitely need at least two 5 gallon tanks and pumps. With the psi and air volume needed to lift the heavy front end I have to let it build up again to fully raise it. I obviously won't be running it at that height and need to make adjustments. I would like to do something different with the rear lower bag mounts and I'm not real excited with the link plates and bolts vs a square u bolt over the spring perches.
The biggest issue I seem to be having is the front double below bags. When I drop the truck they go down over the bottom plate. I need to really get high psi to pop them back up and over the plate. They literally make a pop noise like setting the bead on a tire then the truck pops up a few more inches. I'm wondering if roll plates would help prevent this because I'm sure that is not good. I definitely do not like it, I can't lower it too low or I have to max them out to bring it back down to ride height. This means I need more air more psi which is also harder on the pumps I'm sure plus it sounds bad when they pop.