homemade Blacked out tails

[kevhill85]

I use VHF on these 3 cars... But I also clear over the vht so it wont lose it shine

You must be registered for see images attach

You must be registered for see images attach

 

[ndians68]

so on this model car paint and the night shade, do you guys do it to the inside or outside of the lense?

 

[RHamill]

so on this model car paint and the night shade, do you guys do it to the inside or outside of the lense?

Outside of the lense.

 

[cheford]

blacked out taillights/tailgate

painted the tails with VHT night shades, and painted the entire tailgate including the red/chrome GMC emblem and the silver "sierra", primer, then flat black.....

 

[Southern Pride]

Did mine last night in about 1.5-2 hrs. Didn't use VHT but some autozone tint in a can.
Washed with dish soap
Shot them until satisfied
Wet sanded with 1000 grit
Waxed/buffed

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Southern Pride]

painted the tails with VHT night shades, and painted the entire tailgate including the red/chrome GMC emblem and the silver "sierra", primer, then flat black.....

Why is your trailer light chord coming through the bumper pad?

 

[TLoud]

I'd show you my tails i did but like i said theyre cracked but heres a few pictures of my buddies cars i did and my old 95'

You must be registered for see images

You must be registered for see images

You must be registered for see images

and heres a couple of my old 95 i sold

You must be registered for see images

You must be registered for see images

 

[cheford]

Why is your trailer light chord coming through the bumper pad?

ran out of zip ties to mount it properly under bumper.....without going under the bumper it kept sliding down and dragging

 

[RTM355]

Cheford and what is wrong with the trailer hitch man.it looks bent as hell.

 

[RTM355]

Oh by the way don't use more then three coats or it will be so dam dark you might get a ticket . Also after you spary the tent . Let dry then do two or three coats clear. Let dry for 1or2 days . Then wet sand with the finest grit sandpaper you can find. Then you a buff compound. Make sure to go infront to back. If by hand do not go in circle. And that use a high gloss polish . You can apply how ever you would like. If with buffer do not let it stay in one place to long you will burn the clear. Not a good thing.