I have known about the High Current Headlight/ 4High Mod for a long time. I built a harness 7 or 8 years ago for my 1999 z56 Tahoe. When I junked it this summer after finding a clean K1500 Suburban, I pulled the harness and other goodies from it before getting rid of it. I recently re worked it lengthening it to reach the firewall with the relays rather than up front with the battery. I also replaced all three relays with new ones.
One thing I never quite figured out with this harness or the old one is where to place the diode to prevent back feeding the High Beam indicator when only the low beams are on.
Here is my basic wiring diagram
I believe the diode should go between 86 on the low beam relay and 87 on the combo relay.
Does anyone see any issue with this. I plan on using this diode.
https://www.radioshack.com/products/3-amp-200v-barrel-diodes
Thanks in advance.
One thing I never quite figured out with this harness or the old one is where to place the diode to prevent back feeding the High Beam indicator when only the low beams are on.
Here is my basic wiring diagram
You must be registered for see images attach
I believe the diode should go between 86 on the low beam relay and 87 on the combo relay.
Does anyone see any issue with this. I plan on using this diode.
https://www.radioshack.com/products/3-amp-200v-barrel-diodes
Thanks in advance.