Okay I was going to say I wouldn't recommend filling huge dents with bondo it will eventually crack if it's too thick, a lot of the guys are around here 100 grit their little dents, but if your gonna get them all the way out I would say try to work it from the back side before you wipe it. It's always better to get the dent as small as you can before wiping it. You could always 80 grit the dent and whip it then feather edge it for the best look, 80 grit, 180, 320, and then prep the panel with primer and so on! Hope all works out[emoji1360]
Sent from my iPhone using Tapatalk