Hedman Elite

[Chevy 97]

I finally got around to putting a new exhaust system on my truck. I also had headers installed. Truck sounds pretty good to me.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Before I had this done, I took off the egr valve and blocked off the hole, then I removed the pipe for the egr valve and plugged off that hole.

You must be registered for see images attach

You must be registered for see images attach

Here is a look at one of the headers off the truck.

You must be registered for see images attach

I used remflex gaskets.

You must be registered for see images attach

I had them use 2 1/2 inch pipe from the headers to one muffler, then 2 1/2 inch pipe the rest of the way out. The muffler is a flo pro performance muffler. I only used one muffler, then I didn't have to put in an H pipe, this way the cylinders balance out.

 

[oohunter04oo]

looks great man! you should upload a video clip so we can here it!

 

[Chevy 97]

I made a short video so you can listen to the exhaust.

You must be registered for see images attach

 

[93SierraWT]

Sounds awesome man. Nice install, too.

 

[carguy327]

Very nice job. Am I right that your pipes run down the passenger side and enter a 2-in 2-out muffler then out behind both wheels?

 

[Chevy 97]

Very nice job. Am I right that your pipes run down the passenger side and enter a 2-in 2-out muffler then out behind both wheels?

Yes that is how it goes.