Chevy 97
Newbie
I finally got around to putting a new exhaust system on my truck. I also had headers installed. Truck sounds pretty good to me.
Before I had this done, I took off the egr valve and blocked off the hole, then I removed the pipe for the egr valve and plugged off that hole.
Here is a look at one of the headers off the truck.
I used remflex gaskets.
I had them use 2 1/2 inch pipe from the headers to one muffler, then 2 1/2 inch pipe the rest of the way out. The muffler is a flo pro performance muffler. I only used one muffler, then I didn't have to put in an H pipe, this way the cylinders balance out.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Before I had this done, I took off the egr valve and blocked off the hole, then I removed the pipe for the egr valve and plugged off that hole.
You must be registered for see images attach
You must be registered for see images attach
Here is a look at one of the headers off the truck.
You must be registered for see images attach
I used remflex gaskets.
You must be registered for see images attach
I had them use 2 1/2 inch pipe from the headers to one muffler, then 2 1/2 inch pipe the rest of the way out. The muffler is a flo pro performance muffler. I only used one muffler, then I didn't have to put in an H pipe, this way the cylinders balance out.