Yes, I will post some pix this weekend. I ended up buying DJM lowers arms and machining a "puck" to adapt the ball joint that fits the new knuckle. The stock arm could work, but it would need a good bit trimming off the very end of the arm. I have a set of DJM uppers coming, but the stock upper arm will work depending on what your ride height is - the BJ fits. The tierod end needs to be flipped, but it fits the knuckle. I'm going to try to get it all lined up this weekend and set my ride height once and for all (just got tires/wheels). Then the rack and pinion swap will begin.
I also ended up with 4-piston front Brembo calipers from a Cadillac ATS. They fit the 13" GM front rotor perfectly. I am planning on ordering the 14" rotors from Summit Racing, but the ATS calipers will require a little clearancing to fit them. I wanted to use 2010+ Camaro Brembos, but they have a wider rotor and I didn't want to modify the calipers to narrow them.