Frame slightly kinked.

[sync]

Hard to get good pictures. 95 Tahoe. I knew it had been wrecked before.

Measuring from the radiator mount back to the first body mount, I get a half inch difference (half inch further back on this (drivers) side).

Whats everyones opinion on being able to pull it out? Yes, I know its cracked it. If it can be pulled, It'll get plated. Before I tore the front off, I did drive it home, it drove straight down the road aside from the wondering steering.

 

[Schurkey]

Contact a reputable frame shop/body shop. See what they say.

 

[Hipster]

Depends on how it measures out and what all is bent. The rail is kinked behind the engine crossmember so the crossmember is Caddy whooped too as well, but did the damage travel further back and the frame is diamond all the way through it's length to the rear leaf mounts etc? Around here frame work runs $90-110/ hr and usually starts with minimum 4 hours to get it mounted on the machine and measured.