Floor pan, inner and outer rocker panel and cab corner replacement

[jmig]

I lost the pics of the floor before I cut all of the rust out but here are some when I started the process of fitting each piece and then welding them into place. This is going in my 89 dually.
New floor pan, inner and outer rocker panels purchased from National Parts Depot.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Floor pan tacked in

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Fitting the inner rocker and found more rust to cut out and replace along with the cab corner.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Inside of the cab corner

You must be registered for see images attach

Outer rocker clamped on for fitment

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Inner rocker tacked in

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Dug into the cab corner and started replacing the areas that were rusted out.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Almost done fitting the outside rocker

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Started fitting the cab corner but need to unbolt the bed

You must be registered for see images attach

 

[Jrgunn5150]

Very nice work so far!

How do you like the panels?

 

[twomanymontes]

Nice work!! Been there done that on my truck. Don't want to do that again!

 

[Horns]

She's coming together man!

 

[jmig]

Very nice work so far!

How do you like the panels?

Nice work!! Been there done that on my truck. Don't want to do that again!

She's coming together man!

Thanks guys, the panels are made very well and the fitment is pretty good as well. I unbolted the bed today and lifted it up enough to get started on the cab corner next weekend

 

[Jrgunn5150]

I'm looking forward to seeing it, after I knock my C10 out, my K1500 will be next, this spring.

 

[Horns]

What color is in the plans for this truck?

 

[jmig]

What color is in the plans for this truck?

5/7 drop, haven't decided on which type of wheels yet it all depends on what will work with this static drop. And of course a two tone paint job!

Got some time yesterday to finish the outer rocker

section, next is to fit the cab corner and get that tacked in. Then a few smaller patch that the floor pan didn't fix.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[DRAGGIN95]

Looking good, getting that rust knocked out!

 

[strikk]

Excellent work, can't wait to see the finished product!


Sent from my iPhone using Tapatalk