GMRedline
I'm Awesome
So I bought all this stuff in October of last year and finally got around to installing it this past weekend. here is what I have.
Walker 40295 Y Pipe $65
https://www.amazon.com/gp/product/B000C938XA/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Flowmaster 2230130 223 Series 3" Inlet/Outlet Universal Catalytic Converter $72
https://www.amazon.com/gp/product/B0085UDUQ8/ref=oh_aui_detailpage_o05_s02?ie=UTF8&psc=1
Flowmaster 53055 Super 50 Muffler $136
https://www.amazon.com/gp/product/B000CE9O06/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
Walker 53014 Intermediate Pipes $36
https://www.summitracing.com/parts/wlk-53014
Dynomax 45670 3" tail pipe $76
https://www.amazon.com/gp/product/B0015KSFRE/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Jegs 30611 3" straight tubing $18
https://www.amazon.com/gp/product/B007VR9PGK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Vibrant 1194A Standard Oxygen Sensor Bung x3 $21
https://www.amazon.com/gp/product/B00180870Q/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Walker 31398 Hardware Gasket $11
https://www.amazon.com/gp/product/B000CQBFII/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
3" Compression V-bands x2 $40
http://www.siliconeintakes.com/dsm-intercooler-piping/v-band-clamps-p-325.html
3" Compression V-Band Clamps x2 $20
http://www.siliconeintakes.com/dsm-intercooler-piping/v-band-exhaust-clamp-p-314.html
Walker 36463 Exhaust Spring Bolt Kit x2 $20
https://www.amazon.com/gp/product/B002VVJRKK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
So I got just over $500 into it.
Cut the stock Y pipe to make getting at the manifold bolts easier.
Two of the nuts were stripped so I had to cut them off. This is my attempt at fixing the cut manifold studs.
Passenger side bung needed to be added because the factory O2 wouldn't reach.
O2 bung also added on the driver's side. Finished y pipe with V band installed.
V Band added to cat and intermediate pipe.
Rear flange installed on the back of the intermediate pipe. I had it laying around or it would be a V Band.
Finished Intermediate pipe.
I didn't get a pick of the flange installed on the muffler or installed to the tail pipe. But the exhaust is in 3 peices so i can easlier remove it from the truck if need.
Installed pics.
I used this on all the welds. It's supposed to stop the welds from rusting. I could tell that Flowmaster used it on their muffler.
Overall I'm very happy with the sound. Nice and deep without being too loud.
Walker 40295 Y Pipe $65
https://www.amazon.com/gp/product/B000C938XA/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Flowmaster 2230130 223 Series 3" Inlet/Outlet Universal Catalytic Converter $72
https://www.amazon.com/gp/product/B0085UDUQ8/ref=oh_aui_detailpage_o05_s02?ie=UTF8&psc=1
Flowmaster 53055 Super 50 Muffler $136
https://www.amazon.com/gp/product/B000CE9O06/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
Walker 53014 Intermediate Pipes $36
https://www.summitracing.com/parts/wlk-53014
Dynomax 45670 3" tail pipe $76
https://www.amazon.com/gp/product/B0015KSFRE/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Jegs 30611 3" straight tubing $18
https://www.amazon.com/gp/product/B007VR9PGK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Vibrant 1194A Standard Oxygen Sensor Bung x3 $21
https://www.amazon.com/gp/product/B00180870Q/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Walker 31398 Hardware Gasket $11
https://www.amazon.com/gp/product/B000CQBFII/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
3" Compression V-bands x2 $40
http://www.siliconeintakes.com/dsm-intercooler-piping/v-band-clamps-p-325.html
3" Compression V-Band Clamps x2 $20
http://www.siliconeintakes.com/dsm-intercooler-piping/v-band-exhaust-clamp-p-314.html
Walker 36463 Exhaust Spring Bolt Kit x2 $20
https://www.amazon.com/gp/product/B002VVJRKK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
So I got just over $500 into it.
You must be registered for see images attach
You must be registered for see images attach
Cut the stock Y pipe to make getting at the manifold bolts easier.
You must be registered for see images attach
Two of the nuts were stripped so I had to cut them off. This is my attempt at fixing the cut manifold studs.
You must be registered for see images attach
Passenger side bung needed to be added because the factory O2 wouldn't reach.
You must be registered for see images attach
O2 bung also added on the driver's side. Finished y pipe with V band installed.
You must be registered for see images attach
V Band added to cat and intermediate pipe.
You must be registered for see images attach
Rear flange installed on the back of the intermediate pipe. I had it laying around or it would be a V Band.
You must be registered for see images attach
Finished Intermediate pipe.
You must be registered for see images attach
I didn't get a pick of the flange installed on the muffler or installed to the tail pipe. But the exhaust is in 3 peices so i can easlier remove it from the truck if need.
Installed pics.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
I used this on all the welds. It's supposed to stop the welds from rusting. I could tell that Flowmaster used it on their muffler.
You must be registered for see images attach
Overall I'm very happy with the sound. Nice and deep without being too loud.