Fender Height Thread

[outalne94z71]

That is where I measured. It probably makes a difference if you still have your fender trim or not to.

I still have mine....

the chrome trim is so thin it would not make a difference but if you have the factory flares those are a bit thicker but even so that is like what 3/16 thick?

 

[Tony_SS]

You must have a lot of crank, that's higher than mine after the lift....

4" RCX 39 1/8 front 40 1/8 rear. On 265's currently

You're only on 265's though.. I have taller tires

 

[dirtridinz71]

49" front & 48 rear for the 92 with SAS and 38's

39" front and rear on the 98 with 2" body lift and 285's

 

[dcZ71]

46" front/45" rear

 

[Hezsus]

fender height is from the flat ground to the tallest (middle) spot on the fender lip.. So i guess cutout flares are kinda like cheating lol

also i'm at 38.5 everywhere now with new ttires that actually have tread

 

[dcZ71]

also fwiw stock height was 36"/37" with the 265/75r16

 

[aggieman]

Have a leveled 96 ecsb 2wd on 31's and I'm at 34" F&R but planning a 4" lift with 33 or 34's so hopefully 39 or 40 after!! Ill get pics up soon.

 

[Chevyguy78]

I have a 6" tuff country lift and 35" coopers im at 43"s front and rear.

 

[eric.s.t]

mine is 3" bl 2" blocks crank and 315/75/16's front is 44" rear is 44 1/2"

You must be registered for see images attach

Dont want to jack the thread... but why isnt this picture your signature!

 

[98chevy4x4]

my 98 is cranked in front and the front is 39 3/4 and the back is 38 1/4 with 18s and 305/65 tires