Ok, the second panel sucked pretty bad too. Here is how I did it.
First, cut the leather 1 inch away from the insert all the way around it.
You must be registered for see images attach
Then pry the leather back towards the insert. The leather will protect the insert.
You must be registered for see images attach
After that try to pry a hole completely through into the door handle opening.
You must be registered for see images attach
Work your way on around until it is removed.
You must be registered for see images attach
Turn it over and trim the excess leather and peel away what you want.
You must be registered for see images attach
Be careful and you will end up with 2 like these, now I gotta see how hard it is to remove the fabric and glue them in.
You must be registered for see images attach