offroadtahoe
I'm Awesome
If you want to run the Cognito Pisk kit with a steering stabilizer,the rough country steering stabilizer kit that comes for 0-3" lifted trucks will not work the bracket is directly in the way of the steering brace upgrade
kryptonite just came out with this but you have to use there upgrade center link,or a stock k2500/3500 center link.kryptonite's center link upgrades handling at the expense of a little turning radius (a little more straight then stock)
https://kryptoniteproducts.com/coll...bolt-on-steering-stabilizer-bracket-1988-1998 the bracket is at an angle,probably lets you install it in the center just like factory without hitting pisk kit.
you can run this kit with no issues with pisk kit just flush against the bottom and corner of the frame
you can use the stock center link with the bracket's that come's in the (bds part #55328 for the bracket kit), (85401 for the dampener),rancho makes the same kit and also seperates them if you want to run a different stabilizer RANCHO RS97265
i opted to just use a center link i had laying around as it the taper also comes with the kit's
kryptonite just came out with this but you have to use there upgrade center link,or a stock k2500/3500 center link.kryptonite's center link upgrades handling at the expense of a little turning radius (a little more straight then stock)
https://kryptoniteproducts.com/coll...bolt-on-steering-stabilizer-bracket-1988-1998 the bracket is at an angle,probably lets you install it in the center just like factory without hitting pisk kit.
you can run this kit with no issues with pisk kit just flush against the bottom and corner of the frame
you can use the stock center link with the bracket's that come's in the (bds part #55328 for the bracket kit), (85401 for the dampener),rancho makes the same kit and also seperates them if you want to run a different stabilizer RANCHO RS97265
i opted to just use a center link i had laying around as it the taper also comes with the kit's
Attachments
Last edited: