Box look's great, that suck's about the sub's, I have alway's taken a regular dual 12 behind the seat truck box and made nice spacer ring's to allow for use of regular 12 in sub's, I will be doing the same in my crew cab with my JL W3's.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I'm having trouble posting pics of my box but I'll try again later. How bad was it with a bench and 4" raise? I have to lift mine 3" I also am going to have to cut panels and sheet metal behind panels to fit my box. I am gonna run four sundown sa8 v2's. Was a custom design which the guy who builds it calls hypertune. I've heard two 8's on 200 rms in a similar enclosure and it will blow your mind. Would believe they are 8'sthere is several different ways you can go with besides cutting the bed and cab. you can LIFT the rear seat. i lifted my old bench seat up about 4inches with some brackets i made so i could fit 2 12s forwards under the rear bench.
im not sure how CC rear seats are so no positive how easy it would be for you to lift. im 6ft tall and raising the seat 4inches made the headroom limited BUT still alright i just wouldnt have took a road trip riding in the back bench
very little headroom.LOL
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
and heres my newer setup with the single bucket seat. its just the front passenger seat from a tahoe or suburban 60/40 40section only. which is why it doesnt have a arm rest. tho if i find another with a arm rest in good shape i might swap out the rear seat for one with arm rest. i just had to cut the inner bracket to fit the floor. so instead of 4 mounting points it only has 3 now. i figure good enough. i got hardened bolts and multiple larger washers under so it should withstand a wreck no problem and stay inplace! i also used the front seat belt latch as well. seems to work good.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
that box is a monster.... the top didnt turn out as good as i wanted it to tho. i wanted to have a nice gap and then put some lighting inside to give a nice glow. BUT after all was built.... well its not enough space when it comes to subs carpet and wraped carpet over top. just didnt turn out how i imagined it.... it happens. o well i can always rebuild
i want to lower the top and move subwoofers to front firing and maybe put the amp on top inside a flush mount hidden wires kinda setup. i just havent felt like pulling it all out and redoing it just yet.
so you got plenty of choices other than blow thru or full wall. and with enough thought and planning and maybe a retry or two you can get it real nice. ive seen some real bad ass setups if you got some skills I LOVE THIS ONE but no way id want to do all that sanding and shaping on the whole interior.LOL
You must be registered for see images attach