Got the axle torn down
Basically every seal is non existent. The bearings and races look good as far as I can tell,still gonna replace them, haven’t delved into them too deep.
The rotors and calipers are gone. Rotors are too rusted to turn and I wouldn’t trust them anyways, and the calipers are completely siezed, had to use an 8 inch c clamp to get them off.
The axle shafts look good other than being dirty but u joints are fairly rusted. The axle tubes are completely filled with dirt and will need to be cleaned and checked.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach