c1500 Burb to c1500 ecsb q's

[94Cheyenne]

I want need new gears in my c1500, will a c1500 burb rear end work minus the sway bar mounts?

I got 342's in it now and I know most 4x2 burbs came with 3.73's would an axle swap work?
Driveshaft?

I found a good deal on the burb rear end and i don't have time to swap ring and pinion in my current rear end...

Thoughts?

 

[Ruger_556]

I'd be interested in this too...

 

[FastOrange]

Will bolt right in, minus swaybar

 

[94Cheyenne]

Will bolt right in, minus swaybar

That's what i figured, just cut the sway bar mount off and the perches should be the same.

 

[FastOrange]

That's what i figured, just cut the sway bar mount off and the perches should be the same.

Yuppers!

 

[94Cheyenne]

The only thing I remember is that i have a 2500 driveshaft in my truck. swap yokes? I think the u joint should be the same size.

 

[SCOTTYINWV]

Look in the glove box of the donor for the rpo code "gt4" (3:73) otherwise it could be anything from a 3:42-4:10