Jesse_Wenting
Old Thread Reviver
360 thousand km 96 350 block 2 bolt main and stock heads. Obviously having everything cleaned and fluxed by the machine shop. Sticking with the stock L31 intake. Plan is a B13004L03053 kit from Eagle, along with pushrods, lifters, oil pump, seals and gaskets, timing chain, water pump and a yet undecided mild cam. All other external accessories will be transferred from my current 98 vortec 305
Goal is 350-400hp at the crank on pump gas, will be going into a daily driver, and spend most of its life between 1500 and 4000rpm the with factory 5500rpm rev limit.
Overall well experienced, but first time builder, be gentle with me . Send me in the right direction, either with parts or my expectations. Do I need threaded rocker studs, cam recommendations for my use case, other stuff I haven't thought of etc.
Looking at you @L31MaxExpress you 383 wizard
Goal is 350-400hp at the crank on pump gas, will be going into a daily driver, and spend most of its life between 1500 and 4000rpm the with factory 5500rpm rev limit.
Overall well experienced, but first time builder, be gentle with me . Send me in the right direction, either with parts or my expectations. Do I need threaded rocker studs, cam recommendations for my use case, other stuff I haven't thought of etc.
Looking at you @L31MaxExpress you 383 wizard