blue bus solid axle adventure

[the big blue bus]

yeah ive got cable on mine so makes it easy

found a f250 d44 so going to run that axle4 now. need a drivers inner shaft and take out the welded spiders and steal all the 6 lug parts i have and swap them on. possibly selling the t case to a guy on fsc so that will ofset price of the axle. getting brackets soon too. wfo is having sale so going to pick up the steering arm and inserts probably. need to get knuckle machined too

 

[the big blue bus]

got some more done. got a open carrier for the front. chromoly shaft to replace the short side. ruff stuff steering kit and the crossover arm. still need to get knuckle machined and the spring hangers then im thinking about starting thr swap. truck runs like right now when cold it shut off on me once and almost stalls untill its warm when driving

 

[the big blue bus]

swaped carriers today. got the knuckle on then messd a stud up so took it bakc off. both shafts are complete now and i just orderd the pitman arm and rear shackle flip for it. sending knuckle out this week to ge tmachined as well

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[grantxurismo]

nice find on the 3/4 ton d44

 

[the big blue bus]

thanks. its almost all together. putting the passenger side together tomorrow. got the rotors and pads yesturday and orders brake lines off summit. got some metric studs for it too just need the drill bits for it. shuld have spring hangers this week so tear down should start in the next week or so.

 

[the big blue bus]

last time with ifs

You must be registered for see images attach

You must be registered for see images attach

ready to come out

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[eric.s.t]

Sweet project! How much lift will it be sitting at your figure when your done?

 

[Solid94]

Nice progress! You will be so happy when your done. Keep up with the pics, it's a good build

 

[the big blue bus]

thanks!

hey solid do you remember what size the pumpkin side u bolt was up front? ive got the other 3 but need one for that.

still a toss up between shock hoops or use the ford mounts. i know i want to run the axle c mount lower shock mount not sure abot the top.

 

[dirtridinz71]

hey solid do you remember what size the pumpkin side u bolt was up front? ive got the other 3 but need one for that.

Im almost positive it is a 4" wide u bolt and an inch or two longer then the others